Wind Turbine Generator 600W DC 12 24V Charge Discharge Control Brake Regulator

Description

Wind Turbine Generator 600W DC 12 24V Charge Discharge Control Brake Regulator
Description
1. this controller can control wind turbines to charge the battery automatically .When the battery is fully charged, brake can be controlled automatically by the interior circuit. When the battery voltage drops to restore voltage level, wind turbine can automatically recover to the battery charging, so as to protect the wind turbine and the battery.
2. Voltage and current limiting are be enabled during recharging to ensure the best charging effect. Meanwhile, it provides the maximum protection to the wind turbine and battery.
3. Unique reverse connect protection circuit. For improper operation the positive and negative of battery, don't need to replace the fuse, only to reset the positive and negative in correct point. So the whole system will be more reliable.
4.With the independent intellectual property rights of modular design, which makes the performance of the whole system to get the biggest safeguard. Rectification of this controller and braking circuit part, have adopted the company design integration module, no matter from heat, or reliability, further than the traditional design.
5. The comprehensive waterproof protection. If the controller without waterproof but used in easy ooze water environment or the humidity is heavy, then the controller is easy to be corroded and damaged. Our product adopts full seal completely waterproof design which adapt to the heavy humidity, salinity, such as ground water operational environment. The protection grade reaches the IP67 above, even in water can steadily work normally for a long time.
6. The comprehensive waterproof protection. If the controller without waterproof but used in easy ooze water environment or the humidity is heavy, then the controller is easy to be corroded and damaged. Our product adopts full seal completely waterproof design which adapt to the heavy humidity, salinity, such as ground water operational environment. The protection grade reaches the IP67 above, even in water can steadily work normally for a long time.
7. Approved ISO9001 quality management system, our factory strictly controls the production and testing quality which guarantees the high quality in maximum.  Workable temperature is from - 35 ~ 70degree
Model
WT060/MPPT060
WT060/MPPT060
Wind Power
600W
600W
Battery rated voltage
12VDC
24VDC
Wind discharge voltage
14.5VDC
29VDC
Wind discharge recover voltage
13.5VDC
27VDC
Braking start voltage
15V
30V
Braking recover voltage
13.5VDC
27V
Braking start current
30A
30A
Battery over discharge recover voltage
12VDC
24VDC
Display
LED
Control  model
PWM(Pulse width modulation) or MPPT
Operation humiture
-35~+75oC
Control size
100×87×28mm
Packing size
200x150x100mm
Product Weight
0.3kgs
Packing weight
0.35gs
Quiescent current
8 mA
Waterproof
IP67
Main function
Wind charge cruuent detection, solar panel and battery transposition protection, battery overcharge.protection,short circuit protection,lighting protection, autobrake function.