Wind Charger Controller Auto/Manual Regulator Residential Turbine Generator Home

Description

Wind Charger Controller Auto/Manual Regulator Residential Turbine Generator Home
Item Description
Small wind turbine controller family, click the picture to access:
1. Safety Instructions
PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION OR OPERATION OF THIS PRODUCT.
1.1 Please make sure the output voltage of wind generator is consistent with rated battery voltage.
1.2 Please connect the cables of plus-n-minus of battery firstly and then connect the three cables of wind generator.
1.3 Please make sure you connect battery and wind generator with controller according to this instruction, opposite polarity or wrong position connection will result in abnormal operation of system or damage of system components.
1.4 When operating hand braking, please make the smaller red cable and battery anode in short circuit, then controller will brake. Disconnect the smaller red cable, hand braking function will be cancel.
2. Wiring
2.1 Connect the “+” and “-“of battery with battery plus-n-minus input terminals of controller.
2.2 Connect the three cables of wind generator with three voltage input terminals of wind generator of controller.
3. Lights
3.1 When battery light (green) is on, it indicates battery connection is normal.
3.2 When wind generator light (green) is on, it indicates wind generator connection is normal and it shows the rotation speed of wind generator by twinkle speed.
3.3 When brake light (red) is on, it indicates controller is braking automatically due to battery full charged or over-current protection function operation of controller.
We have some pieces of this controller in Poland warehouse.
Buying several pieces at one time would save a lot of freight cost.
Items
FW03-12
FW12/24
FW06-24
Rated Battery Voltage
12V
12V/24V auto
24V
Rated Wind Generator Capacity
300W
300W/600W
600W
Wind Generator Braking Voltage
15V
15V/30V
30V
Wind Generator Recover Voltage
13.5V
13.5V/27V
27V
Wind Generator Braking Current
30A
60A/30A
30A
Display Mode
LED
LED
LED
Ambient Temperature
-35~+75℃
-35~+75℃
-35~+75℃
Dimensions(L x W x H)
100mm×87mm×28mm
100mm×87mm×28mm
100mm×87mm×28mm
Quiescent Current
≤20 mA
≤20 mA
≤20 mA
IP Protection Level
IP67
IP67
IP67
The controller is compatible with these wind turbines, click the pictures for details:
Payment
Please ensure the shipping address on your account is correct. If you have any address changes, please inform us on the eBay note. All orders can be canceled until they are shipped. If your order has been paid and you need to change or cancel it, you must contact us within 2 hours. Once the packaging and shipping process has started, it can no longer be canceled.
Shipping
Once we have received payment, your items will be dispatched in 1-2 days. Delivery time 7-30 days. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. If your shipment delays or you have not received your order within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply.
Return
We offer a 100% money-back guarantee on products that are defective or damaged during shipping. Just contact us with pictures of the damaged items. We will refund the full purchase price of your item and we will send a replacement or refund the full purchase price as preferred. We will refund you for items returned within 60 days of you receiving them, for any reason. To be eligible for a refund, your item must be unused and in the same condition that you received it. Customers will be responsible for paying shipping costs for returning items. It must also be in the original packaging. Before returning items, please contact us. To be eligible for a refund please contact us within 7 days of you receiving the item.