Wind Charge Controller 1500W 2000W 3000W Turbine Generator Waterproof Regulator

Description

WIND CHARGE CONTROLLER 1500W 2000W 3000W TURBINE GENERATOR WATERPROOF REGULATOR
Item Description
Product Features / Advantage
New Wind Controller
Generally speaking, wind turbine is three phase and the output voltage is not very stable. Wind controller is an important components in the wind system. This wind controller is with top quality and excellent performance.
1.Low Voltage Chargiing---MPPT
2. this controller can control wind turbines to charge the battery automatically .When the battery is fully charged, brake can be controlled automatically by the interior circuit. When the battery voltage drops to restore voltage level, wind turbine can automatically recover to the battery charging, so as to protect the wind turbine and the battery.
3. Voltage and current limiting are be enabled during recharging to ensure the best charging effect. Meanwhile, it provides the maximum protection to the wind turbine and battery.
4. Unique reverse connect protection circuit. For improper operation the positive and negative of battery, don't need to replace the fuse, only to reset the positive and negative in correct point. So the whole system will be more reliable.
5. LED indicate circuit working condition, concise, intuitive, and clear
6. With the independent intellectual property rights of modular design, which makes the performance of the whole system to get the biggest safeguard. Rectification of this controller and braking circuit part, have adopted the company design integration module, no matter from heat, or reliability, further than the traditional design.
7. The comprehensive waterproof protection. If the controller without waterproof but used in easy ooze water environment or the humidity is heavy, then the controller is easy to be corroded and damaged. Our product adopts full seal completely waterproof design which adapt to the heavy humidity, salinity, such as ground water operational environment. The protection grade reaches the IP68 above, even in water can steadily work normally for a long time.
8. Approved ISO9001 quality management system, our factory strictly controls the production and testing quality which guarantees the high quality in maximum.  Workable temperature is from - 40 ~+ 80degree.
Technical Parameters
Model
HX-MPPT24
HX-MPPT48
HX-MPPT96
HX-MPPT120
Wind Power
1.0KW/1.5KW/2.0KW
1.0KW/1.5KW/2.0KW/2.5KW
2.0KW/2.5KW/3.0KW
3.0KW
Battery rated voltage
24V
48V
96V
120V
Wind discharge voltage
29V
58V
116V
145V
Wind discharge recover voltage
27V
54V
108V
135V
Braking start voltage
30V
60V
120V
150V
Braking recover voltage
27V
54V
108V
135V
Battery over discharge recover voltage
24
48
96V
120V
Display mode
LED
Control  model
MPPT(Charging Efficiency 30%higherthan PWM Type)
Ambient Temperature
-40~+80oC
Control size
150×135×50mm
Packing size
210x180x90mm
Packing weight
1.12kgs
Quiescent current
≤10 mA
IP Protection Level
IP68(In water can steadily work normally for a long time)
Main function
Wind charge cruuent detection, wind generator and battery transposition protection, battery,  overcharge.protection,short circuit protection, autobrake function.
Operation Instructions
First: connect the red and black lines with the "+" &"-" of the battery bank;
when the green "Battery Light" lights on, which means that the battery is connected correctly, then can continue the second step.
Next: connect the three green wires with the output wires of the wind turbine generator.
The green "Charge Light" flashes, which means that the wind generator works and is charging the battery.
Flashing speed shows the rotate speed of wind turbine generator.
When the wind turbine generator is braking, the another red "Brake Light" will be on, which usually happen when the battery full charged or the wind speed too high.
Please be sure to notice:
1) the rated output voltage of wind turbine generator needs to be same with the rated voltage of battery bank.
2) the controller must firstly be connected with the battery, then can connect wind turbine generator.
Payment
Please ensure the shipping address on your account is correct. If you have any address changes, please inform us on the eBay note. All orders can be canceled until they are shipped. If your order has been paid and you need to change or cancel it, you must contact us within 2 hours. Once the packaging and shipping process has started, it can no longer be canceled.
Shipping
Once we have received payment, your items will be dispatched in 1-2 days. Delivery time 7-30 days. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. If your shipment delays or you have not received your order within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply.
Return
We offer a 100% money-back guarantee on products that are defective or damaged during shipping. Just contact us with pictures of the damaged items. We will refund the full purchase price of your item and we will send a replacement or refund the full purchase price as preferred. We will refund you for items returned within 60 days of you receiving them, for any reason. To be eligible for a refund, your item must be unused and in the same condition that you received it. Customers will be responsible for paying shipping costs for returning items. It must also be in the original packaging. Before returning items, please contact us. To be eligible for a refund please contact us within 7 days of you receiving the item.