Set i-1500W 48V Windgenerator + Hybrid Charge Controller iSTA-BREEZE

Description

Created with
Eselt
-
Mobile Templates for eBay Sellers
istabreeze.store Experience since 2011
Send us a message
Created with
Eselt
-
Mobile Templates for eBay Sellers
Our Store
Seller Profile
Feedback
Save this seller
Contact
Created with
Eselt
-
Mobile Templates for eBay Sellers
Set i-1500W 48V Windgenerator + Hybrid Charge Controller iSTA-BREEZE
Find now your wind generator from ISTA BREEZE Company go to my ebay shop
Description
Robust wind generator Original iSTA-Breeze i-1500 48V
Due to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable, at the same time unusually light.
The housing is equipped with cooling fins and is made of high-strength aluminum.
The maintenance-free, sliding contact (without coal) guarantees a good flow of current and thus no twisting of the cable in the mast.
Installation in mast tube by plug connection. Required mast tube inner diameter: 37 mm nominal size!
Further technical data further down in the description.
This product is used successfully 1000 times worldwide! 2 years manufacturer's warranty!
PRODUCT FEATURES - WIND TURBINE
Body Supporting Element: Aluminum die casting (powder coated)
Voltage: 48 V (AC)
Rated Power: 1500W
Current: 25A
Generator: Aluminum profile (powder coated)
BLADE SPECIFICATION
Lenght: 107 cm
Noise: 40 db
Weight: 650g (white per blade) 780 gr (carbon per blade)
Rotor Diameter: 220 cm
Color: Carbon or White
Carbon is light, silent and start turn fast
CHARGE CONTROLLER
◆Big LCD display.The images tell working state visually.Various data show: real-time wind turbine voltage,current,power;solar panel voltage,current, power;battery group voltage, charge current.(The main board is with button battery,in case of power failure, history data can be saved for 30 days)  ◆Two sets of control systems：PWM constant voltage system and three-phase dump load system. ◆PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM´s capacity, the three-phase dump load will automatically start immediately to ensure safe running of the overall wind turbine system.  ◆When the strong or super-strong wind conditions PWM control to ensure battery charged by the wind turbine with constant voltage and current. ◆When the battery disconnect or damage, the three-phase dump load will start automatically to avoid the wind turbine idling and runaway accident. ◆The protection function of battery: polarity reverse protection, disconnection and damage protection.  ◆Over-charging protection of the battery: When the battery is full (the battery voltage getting 125% of the rated voltage), the controller will carry out three-phase dump load automatically to stop charging the battery.
HYBRID CHARGE CONTROLLER- TECHNICAL DETAILS
Wind Turbine Rated Power: 2KW
Solar Panel Power: 600 Wp
Battery: 48VDC
Pwm Constant Pressure Voltage: >58vdc
3-phase load voltage of the wind turbine: 60±1Vdc
Solar Controller Stop Charging Voltage:  58±1Vdc
Low Voltage of the Battery: 40±1Vdc
PWM Fuse: 50A * Solar Fuse: 20A
Charging Fuse: 63A * Noise (1m): <40dB
Degree of Protection: IP20 (Indoor)
Cooling Method: Forced Air Cooling
emeauctiononlinesoftware.responsive.2016
supremeauctiononlinesoftware.redesigner
Created with
Eselt
-
Mobile Templates for eBay Sellers
Created with
Eselt
-
Mobile Templates for eBay Sellers