Patriot True Power 1600W Watt Wind Turbine Generator PMA 12 Volt AC White Blade

Description

Pa
triot
-WZ
12V AC 1600W Wind Turbine Kit with
WindZilla
For Land or
Marine
Use
Product designed in Canada
The WZ model is Specifically designed for:
GreenergyStar's
WindZilla
PMA installed into the Patriot.
Introduction
Over the last few decades renewable energy has started to gain its ground. Of all the different kinds of alternative energy sources available, the use of wind power has been growing steadily. Home owners have since adpoted to DIY wind projects. However, the task of building a wind turbine from ground up is no easy task. Most DIY wind turbines availalbe in the market today have a lot of mechanical flaws and are not visually attractive. Not only does the unsightly turbine attracts much complains, but flaws that were never addressed will result in frequent maintenance and headaches, which eventually leads to abandonment / cancelation of the project. Since there are a lot of room for imporovment, we have designed a new wind turbine - the Patriot to bring things up to par. To name a few, Anti vibration system to increase power efficiency. More details / features will be available below:
Exploded View
Generator Specification:
Voltage
3Phase 12 VAC
Permanent Magnet
Rare Earth Neodymium magnets
Moisture /Corrosion Resistance
Yes, sealed exterior, ball bearing, coated rotor
Shaft Daimeter
17mm
RPM at 12V
300RPM
Body Material
Aluminium Alloy & Steel
Rotor Diameter
12cm (4.75 inches)
Length
11cm (4.5 inches)
Weight
2.88kg (6.47 lbs)
Mount
6 Slots for bolts
Cable Length
approx. 18cm (7inch)
Rotation
Bi-directional, recommend clockwise
The above battery charging power curve is obtained from charging a 12V 88Ah battery bank with our
SolarWind Hybrid Charge Controller
. (not included in this listing)
What is the difference in an
Pa
triot
Wind Turbine?
GreenergyStar's Patriot Wind Turbine is the most mechanically advanced generator in the market today. It features many upgrades that solves performance issues that our competitors struggle with. It is designed to work with other
GreenergyStar branded
products such as the SolarWind Hybrid RX charge controller and grid tie inverters to better utilize the renewable energy generated. The following list will summarize its major features:
I. Exceptional Body Design
Built-in Tower Adapter with Anti Vibration & Fictionless Rotation System
With Dual Bearing
-
Dual Metal ball bearing
to prevent vertical vibration
- Yaw shaft diameter: 40mm
- 3cm of stabilizing distance with 2 bearings
- No vibration = Increase in efficiency
- Reduction in noise output
- One piece design Yaw body provides more stability
Without Tower Adapter / Bearing
- When there is no tower adapter, it makes installation harder than it has to be
-Without bearing, metal connection / joints will grind on each other and wear out
- Plays will get larger and turbine will vibrate during operation
Water Proof
Anti-Leak System
Pros
- Unlike rubber, PVC Rings are much more durable will not harden and crack and cause leaks
- Bearings are covered and will not rust / leak / short circuit
Tilt Angle
Pros
- Compensates thrust forces from incoming wind
- 5 degree Tilt Angle ensures the blades will never hit the tower during strong wind
II. Blades, Hub
Blade Features
- Color: White
- With 62" swept area when mounted on a 5.5" Hub
- Incorporates highly efficient, true airfoil
- Quiet performance with minimal vibration
- Can generate 800 watts or more depending on PMA efficiency
- Manufactured using a precision injection molding process that produces blades of exceptional consistency
- Made with new thermoplastic to increase durability
- Smoother and more durable than any blades you can find in the market
- Adjustable blade degree with included degree adjusters / shims (see picture below)
- High resistance to bending (over 150 degrees)
What is Nylon 6.6?
Nylon is a man made product. On the man made side, you will see primarily three types of thermoplastic. These are polyester, polypropylene, and nylon. Of the three types, nylon is by far the better choice.
Nylon is extremely versatile in its applications. It is highly resistant to
abrasion
and has excellent
resilience
.
Within nylon, there are two groups:
nylon 6
and
nylon 6.6
. Nylon 6.6 is the
premium thermoplastic
. It is the thermoplastic that is most often specified by professional architects and designers because it provides the
flexural strength,
low-temperature toughness, UV Resistance
and is the most
resilient
. Nylon 6.6 performs well in many applications such as wind turbine blades, automotive parts, and other fields that get a lot of wear and tear. Nylon 6.6 has additional molecules that give extra strength and the resilience compared to nylon 6. If you still have no idea what Nylon 6.6 is, do a search on google.
Adjustable blade degree with included degree adjusters (Shims)
Increase/decrease blade angle by installing degree adjuster under the blades
"+" on the right side = Increase angle =
More
Torque, Less Speed
"-" on the right side = Decrease angle = Less Torque,
More
Speed
Specification
Material
Nylon 6.6 + Carbon Fiber (<20%)
Length
29 inches
Width (base)
6 inches
Mounting
6mm bolts
Weight (per blade)
340g, 12oz
Hub Features
Hub Specifications:
Material
Aluminum (with coating)
Diameter
140mm
Capacity
3-6 Blades
Compatibility
Air-X, 403, 303
Shaft Diameter
for 17mm shaft
Disc Thickness
23mm
Weight
0.30kg
III. Demostrate Your Patriotic Pride!
Tail Specifications:
Material
Aluminum
Length
104cm (41 inches)
Weight
1.25kg (2.75 lbs)
IV. Rebuildable, Perfect DYI Project
What are included:
- 1 Patriot-
WZ
Wind Turbine
- 1 WindZilla PMA
- 6x Blades
- Hub with 6 lots
- Tail
- Screws and Nuts
- Degree Adjuster
- Allen Key
- Instruction Manual
Specification
Body Material
Aluminum
Rotor Diameter
170.0cm (67 inches)
Survival Wind Speed
45m/s
Voltage
12 VAC
Weight
11.02kg (24.29 lb)
Yaw Body / Tower Mount
Inner Diameter
53.3mm, 2.1 inch
Recommended Tower (Pipe) Size
1.5 inch schedule 40 pipe
Actual Pipe diameter: 48mm (1.9 inch)
Recommend adding 2.5mm padding
WARNING !!!
Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury. Under no circumstances should you install the turbine where a
person could come in contact with moving rotor blades.
The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products
Warranty:
We will warrant this unit against any manufacture defects or workmanship for 1 year from the date of purchase. This limited warranty specifically excludes damage caused by
improper installation, accident, misuse
,
abuse
,
improper
storage
, or
any unauthorized disassembly, repair, or modification
.This warranty is not transferable. In the event of a claim against this warranty, the seller's obligation, and the claimant's sole remedy, shall be replacement of the product, repair, or refund of the original purchase price excluding any shipping and handling fees. All shipping and handling fees going both ways are responsible by the buyer.
NO OPERATING COST
GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND
Terms & Conditions
Bidding on this auction means that you agree with the following terms & conditions.
All pictures and descriptions are subjected to change without notice. Items may or may
not
look exactly the same as the auction shown. We are not responsible for any inadvertent errors.
Payment
Total payment = winning price + shipping & handling
Example A: Winning price: .00, S&H: .00, then Total = US.00
Example B: Winning price: .00, S&H: .00, then Total = US.00
There will be an extra US{{detail_product_description}}.50 the Paypal penalty fees for any insufficient Paypal payments.
Shipping and Handling
1. Shipping & Handling fees includes: the shipping fee itself, eBay and Paypal commissions, packaging materials, documentation and other minor fees.
2.
Please refer to the shipping chart for details.
3. APO / FPO shipping is equal to International shipping. Please refer to S&H price list above for details.
4.Combine shipping is available to buyers when the following conditions are met:
ALL items are paid in a
SINGLE
payment
Items are purchased within 2 days
International Buyers:
Due to high shipping outside of North America, there will be no combine shipping discount when accumlated shipping fees is below US.00.
*note: combine shipping are charged based on the highest shipping cost of the 1st item and half of the shipping for each additional items. i.e.:
Item A Shipping: .00
Item B Shipping: .00
Item C Shipping: .00
Then total shipping will be .00 (item C is highest) + .50 (1/2 of item B) + .50 (1/2 of item A) = .00
5. Items are shipped within 48 hours after payment is confirmed. Please expect 5 to 10 business days before you receive your item(s). International bidders should expect a longer time.
6. Bounce backs due to incorrect shipping address will result in setback on deliveries. Usually it will take 45 days for bounce backs to return to us. So, PLEASE make sure you address is correct. It will be the buyer's responsibility to repay the S&H if such incident has occurred
Return & Refund Policy
No refunds after 30 days
Shipping & handling & other service fees are
NOT
refundable
All returned items must be in original packing.
Items that are used/ damaged/ deformed or altered in any ways are not acceptable.
A 20% restocking fee will be charged on all refunded items.