-40%

Midnite Solar Clipper DC MNCLIP1.5KDC2.4 Wind or Hydro 1,500W 2.4 Ohm USA Made

$ 976.8

Availability: 100 in stock
  • Condition: New
  • All returns accepted: Returns Accepted
  • Country/Region of Manufacture: United States
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Restocking Fee: No
  • MPN: MNCLIP1.5KDC2.4
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Brand: Midnite Solar
  • Model: MNCLIP1.5KDC2.4

    Description

    Midnite Solar Clipper DC MNCLIP1.5KDC2.4 Wind or Hydro 1,500W 2.4 Ohm USA Made
    Midnite DC Clipper
    MNCLIP1.5KDC2.4
    Used with Midnite Classic MPPT Charge Controllers
    Please note that there is a 3 week lead time on this item. Each unit is built per order and shipped direct from the manufacturer
    The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a standalone self-powered adjustable max VOC limiting circuit. The DC Clipper is designed to work with DC turbines and was designed for up to 1.5kw maximum turbines. The 1.5K DC Clipper comes standard with 2.4 ohms of resistance. We can order custom other resistance values upon request.
    1,500 watt DC Clipper for Wind or Hydro designed to work with the MidNite Classic. The Clipper comes in different resistance values per phase to allow you to tailor it to your specific turbine.
    The 1,500 watt DC Clipper comes in the standard value of 2.4 ohms per phase (3 resistors 0.8ohms in series).
    Environmental Rating - Type 1 (Indoor)
    Warranty - 5 yrs.
    Made in the USA
    FREE! Sellers: Add a FREE map to your listings. FREE!
    Hurricane Wind Power
    2019
    Corporate America Today
    2019 Best Off-Grid
    Renewable Energy
    Product Supplier - USA
    UP TO 50% DISCOUNTS
    TOP BRANDS
    Payment
    Shipping
    Returns
    Payment
    Shipping
    Returns
    We accept payment by any of the following methods:
    PayPal
    Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
    We offer
    Fast shipping
    on all orders!
    Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
    In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
    If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
    You can return a product for up to 14 days from the date you purchased it.
    Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
    See our other items
    Thank you for visiting our Ebay store!
    Midnite DC Clipper MNCLIP1.5KDC2.4 Used with Midnite Classic MPPT Charge Controllers Please note that there is a 3 week lead time on this item. Each unit is built per order and shipped direct from the manufacturer The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a standalone self-powered adjustable max VOC limiting circuit. The DC Clipper is designed to work with DC turbines and was designed for up to 1.5kw maximum turbines. The 1.5K DC Clipper comes standard with 2.4 ohms of resistance. We can order custom other resistance values upon request. 1,500 watt DC Clipper for Wind or Hydro designed to work with the MidNite Classic. The Clipper comes in different resistance values per phase to allow you to tailor it to your specific turbine. The 1,500 watt DC Clipper comes in the standard value of 2.4 ohms per phase (3 resistors 0.8ohms in series). Environmental Rating - Type 1 (Indoor) Warranty - 5 yrs. Made in the USA [FREE! Sellers: Add a FREE map to your listings. FREE!] (http://newage.mystoremaps.com/echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=1)
    Midnite Solar Clipper DC MNCLIP1.5KDC2.4 Wind or Hydro 1,500W 2.4 Ohm USA Made
    Midnite DC Clipper
    MNCLIP1.5KDC2.4
    Used with Midnite Classic MPPT Charge Controllers
    Please note that there is a 3 week lead time on this item. Each unit is built per order and shipped direct from the manufacturer
    The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a standalone self-powered adjustable max VOC limiting circuit. The DC Clipper is designed to work with DC turbines and was designed for up to 1.5kw maximum turbines. The 1.5K DC Clipper comes standard with 2.4 ohms of resistance. We can order custom other resistance values upon request.
    1,500 watt DC Clipper for Wind or Hydro designed to work with the MidNite Classic. The Clipper comes in different resistance values per phase to allow you to tailor it to your specific turbine.
    The 1,500 watt DC Clipper comes in the standard value of 2.4 ohms per phase (3 resistors 0.8ohms in series).
    Environmental Rating - Type 1 (Indoor)
    Warranty - 5 yrs.
    Made in the USA
    FREE! Sellers: Add a FREE map to your listings. FREE!
    Hurricane Wind Power
    2019
    Corporate America Today
    2019 Best Off-Grid
    Renewable Energy
    Product Supplier - USA
    UP TO 50% DISCOUNTS
    TOP BRANDS
    See our other items
    Payment
    We accept payment by any of the following methods:
    PayPal
    Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
    Shipping
    We offer
    Fast shipping
    on all orders!
    Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
    In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
    Returns
    If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
    You can return a product for up to 14 days from the date you purchased it.
    Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
    Thank you for visiting our Ebay store!
    Midnite DC Clipper
    MNCLIP1.5KDC2.4
    Used with Midnite Classic MPPT Charge Controllers
    Please note that there is a 3 week lead time on this item. Each unit is built per order and shipped direct from the manufacturer
    The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a standalone self-powered adjustable max VOC limiting circuit. The DC Clipper is designed to work with DC turbines and was designed for up to 1.5kw maximum turbines. The 1.5K DC Clipper comes standard with 2.4 ohms of resistance. We can order custom other resistance values upon request.
    1,500 watt DC Clipper for Wind or Hydro designed to work with the MidNite Classic. The Clipper comes in different resistance values per phase to allow you to tailor it to your specific turbine.
    The 1,500 watt DC Clipper comes in the standard value of 2.4 ohms per phase (3 resistors 0.8ohms in series).
    Environmental Rating - Type 1 (Indoor)
    Warranty - 5 yrs.
    Made in the USA
    FREE! Sellers: Add a FREE map to your listings. FREE!