Mast, Tower Kit for 40 Kg Wind Turbine IstaBreeze®

Description

Created with
Eselt
-
eBay Templates
istabreeze.store Experience since 2011
Send us a message
Created with
Eselt
-
eBay Templates
Our Store
Seller Profile
Feedback
Save this seller
Contact
Created with
Eselt
-
eBay Templates
Mast, Tower Kit for 40 Kg Wind Turbine IstaBreeze®
Find now your wind generator from ISTA BREEZE Company
Description
Without Vibration Damper :
📣 Diameter of the mast is 60 mm, The mast can be extended by a maximum of 2 meters!
📣 Inner hole, connector wind generator is 37 mm
4 meters IstaBreeze TOWER for wind generator i700 to i2000, IstaBreeze It has never been so easy to install a wind generator. With the IstaBreeze Tower it is possible to build a wind generator in a few minutes. The folding system simplifies the whole process. During maintenance, only a few screws are released and the tower can be folded for maintenance. Dowels and screws for the floor (concrete floor) is still needed !! Optional The vibration damper for the wind generators i-500- L-500 and i-700 to i-2000, reduces the transmission of structure-borne noise from the wind generator into the mast and thus possibly into the house. The retrofit is very simple, since the body silencer has the same dimensions as the wind generator, it must only be inserted between them and screwed with matching screws on the mast and the wind generator.
With Vibration Damper :
📣 Diameter of the mast is 60 mm, The mast can be extended by a maximum of 2 meters!
📣 Inner hole, connector wind generator is 37 mm
📣 The vibration damper is compatible with our original IstaBreeze masts 15kg and 40kg.
📣 Total Height of vibration damper is 20 cm, Overall diameter of damper is 13,5 cm
📣 Weight of damper is 3.7 kg
4 meters IstaBreeze TOWER for wind generator i700 to i2000, IstaBreeze It has never been so easy to install a wind generator. With the IstaBreeze Tower it is possible to build a wind generator in a few minutes. The folding system simplifies the whole process. During maintenance, only a few screws are released and the tower can be folded for maintenance. Dowels and screws for the floor (concrete floor) is still needed !! Optional The vibration damper for the wind generators i-500- L-500 and i-700 to i-2000, but not for windsafe models. reduces the transmission of structure-borne noise from the wind generator into the mast and thus possibly into the house. The retrofit is very simple, since the body silencer has the same dimensions as the wind generator, it must only be inserted between them and screwed with matching screws on the mast and the wind generator. Features of Vibration Damper: Generator mount / inner dimension: 37mm Pole mount / external dimension: 37mm Screws: stored in rubber (stainless steel V2A)
premeauctiononlinesoftware.responsive.2016
supremeauctiononlinesoftware.redesigner
Created with
Eselt
-
eBay Templates
Created with
Eselt
-
eBay Templates