Apollo True Power 5000W AC 12V /24V Magnet PMA Wind Turbine Generator

Description

GreenergyStar
Apollo 5000W
AC 12V /24V Wind Turbine
for Land or
Marine
Use
Product designed in Canada
Introduction
Over the last few decades renewable energy has started to gain its ground. Of all the different kinds of alternative energy sources available, the use of wind power has been growing steadily. However, wind turbines that are available for homeowners in the market today are mostly designed (or copied) a decade ago and although they work, most have mechanical flaws that were neglected since their debut and there is a lot of room for improvements. With that in mind, we have redesigned a new wind turbine - the Apollo. Built-in with a stronger alternator for higher power output, Anti-vibration system to increase power efficiency, and the ability to be customized and upgraded for the future.
Exploded View
(No inverter, batteries, turbines and solar panels included in this listing)
only the highlight parts are included. No nose cone, and
tail.
Apollo True power 5000w
VS
Competitor's 400w-5200w
YouTube
Using 5000W and other brands to power halogen lamp
[isdntekvideo]
Test
By Halogen Lamp ,  Not LED !
What is the difference in an
Apollo
Wind Turbine?
GreenergyStar's Apollo Wind Turbine is the most mechanically advanced generator in the market today. It features many upgrades that solves performance issues that our competitors struggle with. It is designed to work with other
GreenergyStar branded
products such as the SolarWind Hybrid RX charge controller and grid tie inverters to better utilize the renewable energy generated. The following list will summarize its major features:
I. Performance
Curves
The above battery charging power curve is obtained from charging a 12V 200Ah battery bank with our
SolarWind Hybrid Charge Controller
.
(not included in this listing)
Slip Ring
For those who are serious about wind power generation, this is a must have item. Never again will the cable get twisted up. Never again will you have to climb up the ladder and fix the tangles. Get a slip ring today and you can put all of that behind you.
Slip Ring Specification:
Circuits
3
Voltage
380VAC
Maximum Current
75A X3
Rated Current
50A X3
Working Speed
250RPM
Temperature
-40'C to 100'C
Wire Gauge
6AWG
Number of bearings
2
Thread
M22x1.5
22mm diameter
1.5mm Thread Pitch
Features:
- High voltage / current carrying capacity
- Copper-graphite brushes ensure long life even under extreme load conditions
- Quick connector for fast connection to the AC / wind turbine *see reference picture below*
- Insulated with fiberglass sleeves to protect wires to the wind turbine and make the installation professional and tidy
- Easily taken apart for quick maintenance
- 2x High Quality Metal Sealed Ball bearing to stabilize axle
Exploded View
Connection Overview
As we can see from the exploded view, the top circuit is color coded
Red
, the middle circuit is
Black
and the bottom circuit is
Blue
.
Rotor
Apollo
True Power
5000w
Competitor's 400w-5200w
Pros
- Larger diameter, thicker core
- The cross-sectional area of the coil is larger, so the magnetic flux is larger and the efficiency is greater.
Core area = 26 x 12 = 312 mm
2
Cons
- only 12mm thickness and thus weaker magnetic flux
- cross-sectional area of the coil is small and electricity output is lower
Core area = 12 x 5 = 60 mm
2
Apollo
True Power
5000w
Competitor's 400w-5200w
Pros
- The area of magnets are 40 x 24
mm
, total 18 pieces. More electricity can be generated.
Cons
- The area of magnets are 12 x 16
mm
, total 12 pieces. Less electricity can be generated.
Apollo
True Power
5000w
Competitor's 400w-5200w
Pros
Wire diameter 1.3 = 1.3266mm
2
. Temperature 20 °C max current 15.5393 x 3 = 46.61A.
Cons
Wire diameter 0.5 = 0.196mm
2
. Temperature 20 °C max current 0.8683 x 3 = 2.604A.
Specification
Rotor Diameter
155mm
Magnet Material
Strong Ferrite
magnets
Number of Magnets
18
Magnet Width (Rotor thickness)
40mm
Weight
3.26kg
II. Anti-Vibration System
Horizontal
Pros
-
Dual Metal ball bearing
located
at
front
and
rear
of rotor
- 6.5cm of stabilizing distance to prevent
rotor and blades from vibrating
- No vibration = Increase in efficiency
- Reduction in noise output
Cons
- 2 bearings placed side by side together
- Stabilizing distance effectively
shorten to 2cm (69% reduction)
- Vibration = Energy wasted
- Wasted energy gets converted to Noise and Heat
Vertical
Pros
-
Triple Metal ball bearing
to prevent vertical vibration
- Yaw shaft diameter: 40mm
- 3cm of stabilizing distance with 2 bearings
- No vibration = Increase in efficiency
- Reduction in noise output
- One piece design Yaw body provides more stability
Cons
- Single bearings will not eliminate vertical vibration
- Yaw shaft diameter: 35mm
- Stabilizing distance effectively shorten to 1.4cm with one bearing (53% reduction)
- Vibration will cause bearing to grind on yaw shaft and create a bigger play, which in turn will cause more vibration in a never ending cycle
- 2 pieces design Yaw body is less stable
IV. Generator Specification
Body Material
Aluminum
Voltage
12 V (400 rmp) / 24 V (750 rmp)
Rated Power
5000W
Maximum Power
10000W
Weight
9.04kg (19.90 lb)
Yaw Body / Tower Mount
Inner Diameter
53.3mm, 2.1 inch
Recommended Tower (Pipe) Size
1.5 inch schedule 40 pipe
Actual Pipe diameter: 48mm (1.9 inch)
Recommend adding 2.5mm padding
Upgrades / Recommendations
(not included in this auction)
WARNING !!!
Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury. Under no circumstances should you install the turbine where a
person could come in contact with moving rotor blades.
The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products
Warranty:
We will warrant this unit against any manufacture defects or workmanship for 1 year from the date of purchase. This limited warranty specifically excludes damage caused by
improper installation, accident, misuse
,
abuse
,
improper
storage
, or
any unauthorized disassembly, repair, or modification
.This warranty is not transferable. In the event of a claim against this warranty, the seller's obligation, and the claimant's sole remedy, shall be replacement of the product, repair, or refund of the original purchase price excluding any shipping and handling fees. All shipping and handling fees going both ways are responsible by the buyer.
NO OPERATING COST
GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND
Terms & Conditions
Bidding this auction means that you agree with the following terms & conditions.
All pictures and descriptions are subjected to change without notice. Items may not look exactly the same as the auction shown. We are not responsible for any inadvertent errors.
Payment
Total payment = winning price + shipping & handling
Insufficient payment will be charge extra US{{detail_product_description}}.50 to compensate the Paypal penalty fees.
Shipping
&
Handling
Total shipping = Base S&H + Combine S&H ( for each additional item )
a) Base S&H is the highest shipping cost of the first item.
1. Combine shipments are only available on the condition of a
SINGLE PAYMENT
. Auctions that are paid separately will NOT be shipped in combo and therefore, they are not qualified for shipping discounts.
2. We ship within 48 hours after payment is received and confirmed. Please allow up to
5-10 BUSINESS DAYS
for item(s) with a physical address sending to the 48 states of United States & Canada. For international bidders, the shipping time varies with respect to your location.
3. Bounce backs due to incorrect shipping address will result in setback on deliveries. It is the buyer's responsibility to repay the shipping & handling fees.
4. We are not responsible for any loses or damages resulting from shipping.
Return & Refund Policy
No refunds after 30 days
Shipping & handling & other service fees are
NOT
refundable
All returned items must be in original packing.
Items that are used/ damaged/ deformed or altered in any ways will not be accepted.
A 20% restocking fee will be charged on all refunded items.
E-mails
E-mails are usually answered within 2~3 business days in priority order.
Spams and mass e-mailing will be deleted without slightest glance.
E-mails with virus or anything subjected to hacking are automatically deleted.