Apollo 550 W Watt 24 V DC (3Blades) Wind Turbine Generator Land/Marine Use

Description

Apollo 550W
DC 24V Wind Turbine
for Land or
Marine
Use
Product designed in Canada
Three Phase Bridge Rectifier
Introduction
Over the last few decades renewable energy has started to gain its ground. Of all the different kinds of alternative energy sources available, the use of wind power has been growing steadily. However, wind turbines that are available for homeowners in the market today are mostly designed (or copied) a decade ago and although they work, most have mechanical flaws that were neglected since their debut and there is a lot of room for improvements. With that in mind, we have redesigned a new wind turbine - the Apollo. Built-in with a stronger alternator for higher power output, Anti-vibration system to increase power efficiency, and the ability to be customized and upgraded for the future.
Exploded View
(No inverter, batteries, turbines and solar panels included in this listing)
What is the difference in an
Apollo
Wind Turbine?
GreenergyStar's Apollo Wind Turbine is the most mechanically advanced generator in the market today. It features many upgrades that solves performance issues that our competitors struggle with. It is designed to work with other
GreenergyStar branded
products such as the SolarWind Hybrid RX charge controller and grid tie inverters to better utilize the renewable energy generated. The following list will summarize its major features:
I. Performance
Curves
The above battery charging power curve is obtained from charging a 24V 100Ah battery bank
Blade Features
- Color: White
- With 49" swept area when mounted on a 5" Hub
- Incorporates highly efficient, true airfoil
- Quiet performance with minimal vibration
- Can generate 800 watts or more depending on PMA efficiency
- Manufactured using a precision injection molding process that produces blades of exceptional consistency
- Made with new thermoplastic to increase durability
- Smoother and more durable than any blades you can find in the market
- Adjustable blade degree with included degree adjusters / shims (see picture below)
- High resistance to bending (over 150 degrees)
What is Nylon 6.6?
Nylon is a man made product. On the man made side, you will see primarily three types of thermoplastic. These are polyester, polypropylene, and nylon. Of the three types, nylon is by far the better choice.
Nylon is extremely versatile in its applications. It is highly resistant to
abrasion
and has excellent
resilience
.
Within nylon, there are two groups:
nylon 6
and
nylon 6.6
. Nylon 6.6 is the
premium thermoplastic
. It is the thermoplastic that is most often specified by professional architects and designers because it provides the
flexural strength,
low-temperature toughness, UV Resistance
and is the most
resilient
. Nylon 6.6 performs well in many applications such as wind turbine blades, automotive parts, and other fields that get a lot of wear and tear. Nylon 6.6 has additional molecules that give extra strength and the resilience compared to nylon 6. If you still have no idea what Nylon 6.6 is, do a search on google.
Adjustable blade degree with included degree adjusters (Shims)
Increase/decrease blade angle by installing degree adjuster under the blades
"+" on the right side = Increase angle =
More
Torque, Less Speed
"-" on the right side = Decrease angle = Less Torque,
More
Speed
Specification
Material
Nylon 6.6 + Carbon Fiber (<20%)
Length
23.5 inches
Width (base)
5 inches
Mounting
6mm bolts
Weight (per blade)
166g, 6oz
Slip Ring
For those who are serious about wind power generation, this is a must have item. Never again will the cable get twisted up. Never again will you have to climb up the ladder and fix the tangles. Get a slip ring today and you can put all of that behind you.
Slip Ring Specification:
Circuits
3
Voltage
380VAC/DC
Maximum Current
60A X3
Rated Current
40A X3
Working Speed
250RPM
Temperature
-40'C to 100'C
Wire Gauge
6AWG
Number of bearings
2
Thread
M22x1.5
22mm diameter
1.5mm Thread Pitch
Features:
- High voltage / current carrying capacity
- Copper-graphite brushes ensure long life even under extreme load conditions
- Quick connector for fast connection to the AC / DC wind turbine *see reference picture below*
- Insulated with fiberglass sleeves to protect wires to the wind turbine and make the installation professional and tidy
- Easily taken apart for quick maintenance
- 2x High Quality Metal Sealed Ball bearing to stabilize axle
Exploded View
Connection Overview
As we can see from the exploded view, the top circuit is color coded
Red
, the middle circuit is
Black
and the bottom circuit is
Blue
.
Rotor
Apollo
Competitor's
Pros
-
20mm
rotor thickness, 66% more compare to competitor's
- Stronger Magnetic flux due to thicker rotor, and thus, more Power
- Evenly spread magnets decrease magnetic drag
- 6 balanced hole to reduce weight
- Reduce forces required to start rotor due to less reciprocation mass
- Brushless
Permanent Magnet Alternator
Cons
- only 12mm in rotor thickness and thus weaker magnetic flux
- Magnets are not evenly spread out (ie: screw at top)
- No weight reduction = harder start up
Specification
Rotor Diameter
77mm
Magnet Material
Rare Earth Neodymium magnets
Number of Magnets
12
Magnet Width (Rotor thickness)
20mm
Weight
682g
Body
Reference picture ONLY.
Please refer to listing details on the actual model you are getting.
- Bigger body allow fitting of a more powerful alternator than competitor's
- Longer body and tail (62cm) allow the Apollo to face wind even if more blades are added while our competitor just spins round and round
- High surface area tail, 33cm in height, 30% more surface area will let the turbine stay focus to incoming wind
- Installation of 29" blades and capture 50% more wind is now possible
Specification
Material
Aluminum (with coating)
Length
62 cm
Tail Height
33 cm
Tail surface Area
225 cm^2
Upgradable with 29" blades
Yes
Blades allowed
6
Hub
Pros
-
140mm
diameter, 10% larger than competitor's
- High blade capacity, allow up to
6
to be installed
- Covers the entire face plate to eliminate vortex
Cons
- 125mm in diameter
- Only allows 3 blades to be installed
- Does not cover face plate completely
Specification
Material
Aluminum (with coating)
Diameter
140 mm
Capacity
6 Blades
Compatibility
Air-X, 403, 303
Shaft Diameter
for 17mm shaft
Disc Thickness
23mm
II. Anti-Vibration System
Horizontal
Pros
-
Dual Metal ball bearing
located
at
front
and
rear
of rotor
- 5.5cm of stabilizing distance to prevent
rotor and blades from vibrating
- No vibration = Increase in efficiency
- Reduction in noise output
Cons
- 2 bearings placed side by side together
- Stabilizing distance effectively
shorten to 2cm (63% reduction)
- Vibration = Energy wasted
- Wasted energy gets converted to Noise and Heat
Vertical
Pros
-
Dual Metal ball bearing
to prevent vertical vibration
- Yaw shaft diameter: 40mm
- 3cm of stabilizing distance with 2 bearings
- No vibration = Increase in efficiency
- Reduction in noise output
- One piece design Yaw body provides more stability
Cons
- Single bearings will not eliminate vertical vibration
- Yaw shaft diameter: 35mm
- Stabilizing distance effectively shorten to 1.4cm with one bearing (53% reduction)
- Vibration will cause bearing to grind on yaw shaft and create a bigger play, which in turn will cause more vibration in a never ending cycle
- 2 pieces design Yaw body is less stable
III. Anti-Leak System
Pros
- Unlike rubber, PVC Rings are much more durable will not harden and crack and cause leaks
- Bearing are covered and will not rust / leak
Cons
- Rubber ring will harden after approximately 1 year of use and will start cracking and leaking
- Bearing are exposed and will rust / leak
IV. Generator Specification
Body Material
Aluminum
Rotor Diameter
124.5cm (49 inches)
Starting Wind Speed
3.5m/s (8 mph)
Rated Wind Speed
13m/s
Survival Wind Speed
45m/s
Voltage
24 VDC
Rated Power
450W
Maximum Power
550W
Weight
7.88kg (17.39 lb)
Yaw Body / Tower Mount
Inner Diameter
53.3mm, 2.1 inch
Recommended Tower (Pipe) Size
1.5 inch schedule 40 pipe
Actual Pipe diameter: 48mm (1.9 inch)
Recommend adding 2.5mm padding
What are included:
-1 Apollo Wind Turbine
- 3x Blades
- Hub with 6 lots
- Nose Cone
- Screws and Nuts
- Degree Adjuster
- Allen Key
- Instruction Manual
WARNING !!!
Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury. Under no circumstances should you install the turbine where a
person could come in contact with moving rotor blades.
The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products
Warranty:
We will warrant this unit against any manufacture defects or workmanship for 1 year from the date of purchase. This limited warranty specifically excludes damage caused by
improper installation, accident, misuse
,
abuse
,
improper
storage
, or
any unauthorized disassembly, repair, or modification
.This warranty is not transferable. In the event of a claim against this warranty, the seller's obligation, and the claimant's sole remedy, shall be replacement of the product, repair, or refund of the original purchase price excluding any shipping and handling fees. All shipping and handling fees going both ways are responsible by the buyer.
NO OPERATING COST
GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND
Terms & Conditions
Bidding on this auction means that you agree with the following terms & conditions.
All pictures and descriptions are subjected to change without notice. Items may or may
not
look exactly the same as the auction shown. We are not responsible for any inadvertent errors.
Payment
Total payment = winning price + shipping & handling
Example A: Winning price: .00, S&H: .00, then Total = US.00
Example B: Winning price: .00, S&H: .00, then Total = US.00
There will be an extra US{{detail_product_description}}.50 the Paypal penalty fees for any insufficient Paypal payments.
Shipping and Handling
1. Shipping & Handling fees includes: the shipping fee itself, eBay and Paypal commissions, packaging materials, documentation and other minor fees.
2.
Please refer to the shipping chart for details.
3. APO / FPO shipping is equal to International shipping. Please refer to S&H price list above for details.
4.Combine shipping is available to buyers when the following conditions are met:
ALL items are paid in a
SINGLE
payment
Items are purchased within 2 days
International Buyers:
Due to high shipping outside of North America, there will be no combine shipping discount when accumlated shipping fees is below US.00.
*note: combine shipping are charged based on the highest shipping cost of the 1st item and half of the shipping for each additional items. i.e.:
Item A Shipping: .00
Item B Shipping: .00
Item C Shipping: .00
Then total shipping will be .00 (item C is highest) + .50 (1/2 of item B) + .50 (1/2 of item A) = .00
5. Items are shipped within 48 hours after payment is confirmed. Please expect 5 to 10 business days before you receive your item(s). International bidders should expect a longer time.
6. Bounce backs due to incorrect shipping address will result in setback on deliveries. Usually it will take 45 days for bounce backs to return to us. So, PLEASE make sure you address is correct. It will be the buyer's responsibility to repay the S&H if such incident has occurred
Return & Refund Policy
No refunds after 30 days
Shipping & handling & other service fees are
NOT
refundable
All returned items must be in original packing.
Items that are used/ damaged/ deformed or altered in any ways are not acceptable.
A 20% restocking fee will be charged on all refunded items.