-40%

74.5mm 2 1/2" Pole Tower Mount Base Foundation for Wind Turbine Generator

$ 263.47

Availability: 11 in stock
  • Brand: GreenergyStar
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • MPN: TowerBase
  • Condition: New
  • Restocking Fee: No
  • Refund will be given as: Money Back

    Description

    GreenergyStar
    2  1/2" Pole / Tower Mounting Base / Foundation
    for Wind Turbines
    Compatible with Air-X, Phoenix & Megashark ,Apollo
    All hardware above are included
    You no longer need guy wires if the height of your turbine is less than 20 feet.
    For mounting wind generator ( Pole and generator are not included)
    Feature:
    Guy wires are no longer needed if the height of the tower is less than 20 feet
    Easy Maintenance of the Wind Turbine. You no longer need to climb a ladder get the job done
    Installation Overview:
    Dig a hole with a dimension of 80 x 80 x 80 cm
    Build a metal cube with dimension 60 x 60 x 60 cm using 12x 80cm x10mm steel rods
    Purchase 8 threaded J bolts (anchor bolts) with a diameter around 18 to 20 mm
    Make a card board with 8 holes matching the metal base
    Fill the hole with 10 cm of concrete and put the 60 cm metal cube in the center
    Stabilize the 8 anchor bolts into the hole with the card board we made in step 4, make sure the threaded part of the bolts is protruding above ground level
    Continue filling the hole with concrete for 15 cm
    Build a number sign "#" with 4x 80cm x 10mm steel rod, the square of the number sign should measure 30 x 30 cm and should be at the center
    Stick 4x 80cm x 10mm metal rod vertically at the corners of the 30 x 30 square. Make sure these rods do not stick out above ground by hammering them down
    Continue filling 30cm of concrete
    Build a 2nd 30 x 30cm number sign "#"
    Fill up concrete until level with ground.
    Wait 2 weeks for the concrete to dry (actual wait time will depend on the grade of your concrete)
    Place the base on the surface of the concrete foundation, with the end of 8 anchor bolts going thru the base.
    Secure the base to the 8 anchor bolts with washers and hex nuts
    Spray some anti-rust when you have the tower, turbine and everything installed at the end of project
    FAQ:
    1. Why do I have to build metal frame (cube) with steel rods? Can I skip them?
    The metal rods are to reinforce the concrete. Without these rods, your foundation will be very brittle and will not last long.
    2. I don't have enough space, can I dig a smaller hole?
    Yes, in the above demo pictures, our foundation is not 80cm cubed. It is 100 x 50 x 50 cm. You just need to scale you metal frame accordingly
    Specification:
    Material
    Coated Steel
    Acceptable Pole Diameter
    Precisely 74.5mm ( around 2 1/2 inches)
    Compatible models
    Southwest Windpower Air-X
    GreenergyStar Phoenix, MegaShark
    (requires our
    tower adapter
    , not included)
    Weight
    21kg, 46lb
    NO OPERATING COST
    GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE
    Terms & Conditions
    Bidding this auction means that you agree with the following terms & conditions.
    All pictures and descriptions are subjected to change without notice. Items may not look exactly the same as the auction shown. We are not responsible for any inadvertent errors.
    Payment
    Total payment = winning price + shipping & handling
    Insufficient payment will be charge extra US{{detail_product_description}}.50 to compensate the Paypal penalty fees.
    Shipping
    &
    Handling
    Total shipping = Base S&H + Combine S&H ( for each additional item )
    a) Base S&H is the highest shipping cost of the first item.
    1. Combine shipments are only available on the condition of a
    SINGLE PAYMENT
    . Auctions that are paid separately will NOT be shipped in combo and therefore, they are not qualified for shipping discounts.
    2. We ship within 2 working days after payment is received and confirmed. Please allow up to
    5-10 BUSINESS DAYS
    for item(s) with a physical address sending to the 48 states of United States & Canada. For international bidders, the shipping time varies with respect to your location.
    3. Bounce backs due to incorrect shipping address will result in setback on deliveries. It is the buyer's responsibility to repay the shipping & handling fees.
    4. We are not responsible for any loses or damages resulting from shipping.
    Return & Refund Policy
    No return accepted
    E-mails
    E-mails are usually answered within 2~3 business days in priority order.
    Spams and mass e-mailing will be deleted without slightest glance.
    E-mails with virus or anything subjected to hacking are automatically deleted.