650 W 12V Wind Generator +1000 W Controller + 600 W Inverter + Solar Panel

Description

1 x
Apollo 650W
AC 12V Wind Turbine
1 x  SolarWind Hybrid
R
X
1000W Charge Controller
1 x  12 V Monocrystaline Solar Panel
1 x   Grid Power III 600W
MPPT
Inverter
for Land or
Marine
Use
Product designed in Canada
Package Includes:
1 x  Apollo 650W AC 12V Wind Turbine
1 x  SolarWind Hybrid RX 1000W Controller
1 x  12 V Monocrystaline Solar Panel
1 x   Grid Power III 600W MPPT Inverter
Certification: CE, RoHS and ISO 9001:2000
International buyers  –   Please note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Customs fees are normally charged by the freight company or collected when you pick the item up. These fees are not additional delivery charges
Connection Overview:
The Wind Generator is connected to the charge controller, which changes the Alternative Current output by the generator to Direct Current (AC to DC). Electricity generated by the wind turbine are then stored to batteries. Note: the 12V Batteries above are not included.
If your home or farm is connected to the power grid, on windier days you may be able to sell excess power generated by your wind turbine to your utility. At other times when the turbine cannot generate all the power you need, you would buy power from the grid. This concept is called net metering.
Even if net metering is unavailable, you might be able to reduce your power bills by using the electricity generated by wind turbines, and become less dependent on your utility.
What is a
SolarWind Hybrid
R
X
Charge Controller?
GreenergyStar SolarWind Hybrid RX is he most advanced charge controller in the market today. Unlike other hybrid controllers, this multipurpose device is designed to work with Southwest Windpower's
Air-X, 403,
and
303
plus other 12V AC/DC turbines and solar panels. The SolarWind Hybrid RX has utilized microprocessor based control electronics, sophisticated monitoring software, high quality finned aluminum casing and an intuitive LED display design. It is designed to work with the
GreenergyStar branded grid-tie inverters
to send renewable energy generated by Air-X, 12V AC/DC Turbine and solar panels back to the grid in a stable, controlled and safe manner. The following list will summarize its major features:
Features:
Hybrid system designed to work with Southwest Windpower's Air-X, 403, and 303 plus other 12V AC/DC turbines and 12V solar panels
Compatible with GreenergyStar branded grid-tie inverters
Maximum power: 1000W
(rated at 27V & 37.5A)
System Voltage: 12V Nominal (see input / output sections for range)
Microprocessor based control electronics to control charging, outputs and dump load
Dump load utilize
Pulse-width modulation (PWM)
switching technology to recover power during high wind periods
Manual Braking switch to isolate wind turbine from the system.
Intuitive LED Display to reflect system status
Keeps battery in an optimum charged state
Prevents overcharge and over-discharge
Internal diode to prevent reverse current to solar panels or wind turbine at night
High quality finned aluminum casing to protect the interior and dissipate heat
Installation Reference - not to scale
(No inverter, batteries, turbines and solar panels included in this listing)
Input Features:
Operating voltage & current on all terminals: 11.5V ~ 27V, 0A ~ 37.5A
Maximum input voltage & current on all terminals: 30V , 40A
Withstand voltage: 35V
(anything above will damage controller)
Stand-by power consumption: 0.1W
AC Turbine
: For 3 phase AC turbine. The 3 wires from AC turbine can be connected to the terminals in no specific order. Built in rectifier will convert AC to DC.
DC Turbines
can also be connected here as the rectifier accepts DC input as well. The
TURBINE
LED will turn
Green
when there is an active input source.
Solar
: The
SOLAR
LED will turn
Green
when there is an active input source.
DC Turbine
: Recommend for Air-X since this terminal has the
Stay Online
feature. The
TURBINE
LED will not turn on since the Air-X has its own (red) charging LED. The
Blue
CHARGE
LED will turn on when there is power coming in from the inputs.
Input Protection & Specification:
Manual Turbine lock to force dump load to turn on
Pulse Width Modulated Dump Load
Stay-Online Feature to keep Air-X up and running in low battery condition
Reverse Polarity Protection
Night Time Reverse current protection to prevent current going into wind turbine and solar panels
Over current Protection (40A Fuse)
Efficiency: Maximum 98%+
Output Features:
Operating output current: 37.5A
Total maximum output current: 40A
Maximum current on individual output: 30A
Voltage tolerance: +/- 5%
Maximum Output Power: 1000W
(rated at 27V & 37.5A)
Output starts when inputs are above 12.5V
The
OUTPUT A, B, C
LED will turn
Orange
with respect to each output.
Charging Features:
Battery is an
input
and an
output
at the same time
The
CHARGE
LED will turn
Blue
indicating battery is being charged
Overcharge protection Cut off voltage: 14.7V
Over-discharge protection Cut off voltage: 11.4V
Recommend using
deep cycle batteries
if possible
Normal lead acid batteries are acceptable as well
3 charging modes: Continuous charging, Pulsing, Trickiling.
Power Supply Modes:
Mode 1 - Power Supply
When input voltages are lower than the battery's voltage, the battery will act as a supply to all outputs. Power to all outputs will be cut when the battery has drop down to 11.4V
Mode 2 - Stay Online (for Air-X only)
When battery voltage is below 11.4V and input voltages is under 9V, even though all outputs will be cut, the charge controller will still send electrical pulse to the DC input terminal every 5 - 10 seconds as indicated by the pulsing
Red
AX SIGNAL
LED. This is necessary for Air-X's internal controller to stay on. Since the Air-X will not wake up on its own, without these pulses, even if wind starts blowing the Air-X will free spin and no power will be generated.
Warning: Controller will get
damaged
if polarity of battery is incorrect
Protection Features:
Dump Load
MUST be connected at all time to protect the charge controller, no dump load = no warranty
Requires a minimum of 1.2Ohm 600W
resistive load
to be connected to the dump load terminal
Dump load activates when AC Turbine is >= 27V
Unlike conventional dump loads that short circuit on activation and drop outputs to zero, the SolarWind Hybrid RX utilizes
Pulse-width modulation (PDM)
switching technology to only dump what is necessary and conserve the rest.
(refer to Figure above)
Activating dump load will slow down the AC turbine and reduce voltage spikes.
Over voltage protection: All outputs will be cut when input voltage is over 30V. However dump load will stay on.
The
DUMMY
LED will turn
Red
when the dump load has been activated
Manual Turbine Lock (Brake)
Manual Turbine Lock is used to force dump load to fully turn on (ie: short circuit)
Useful when it is necessary to isolate AC wind turbine from the system (ie: during installation or maintenance)
Turbine lock is the red switch at the top-left corner of the Output Face (refer to Figure 1 on page 6)
" | " - locks turbine
" 0 " - unlocks turbine
Mechanical Specifications:
Operating temperature range
-25'C - 85'C
Weight
952g
2.1lb
Dimension (L x W x H)
19.3 x 13.1 x 6.9 cm
7.5" x 5.2" x 2.7"
Mounting
Wall Mount at base
Cooling
Convection cooled with fan
(activate around 50'C ~ 60'C)
Casing
High quality finned aluminum to act as heat sink for fast heat dissipation
Apollo Wind Generator
Over the last few decades renewable energy has started to gain its ground. Of all the different kinds of alternative energy sources available, the use of wind power has been growing steadily. However, wind turbines that are available for homeowners in the market today are mostly designed (or copied) a decade ago and although they work, most have mechanical flaws that were neglected since their debut and there is a lot of room for improvements. With that in mind, we have redesigned a new wind turbine - the Apollo. Built-in with a stronger alternator for higher power output, Anti-vibration system to increase power efficiency, and the ability to be customized and upgraded for the future.
Exploded View
(No inverter, batteries, turbines and solar panels included in this listing)
What is the difference in an
Apollo
Wind Turbine?
GreenergyStar's Apollo Wind Turbine is the most mechanically advanced generator in the market today. It features many upgrades that solves performance issues that our competitors struggle with. It is designed to work with other
GreenergyStar branded
products such as the SolarWind Hybrid RX charge controller and grid tie inverters to better utilize the renewable energy generated. The following list will summarize its major features:
I. Performance
Curves
The above battery charging power curve is obtained from charging a 12V 100Ah battery bank with
our
SolarWind Hybrid Charge Controller
.
Blade Features
- Color: White
- With 49" swept area when mounted on a 5" Hub
- Incorporates highly efficient, true airfoil
- Quiet performance with minimal vibration
- Can generate 800 watts or more depending on PMA efficiency
- Manufactured using a precision injection molding process that produces blades of exceptional consistency
- Made with new thermoplastic to increase durability
- Smoother and more durable than any blades you can find in the market
- Adjustable blade degree with included degree adjusters / shims (see picture below)
- High resistance to bending (over 150 degrees)
What is Nylon 6.6?
Nylon is a man made product. On the man made side, you will see primarily three types of thermoplastic. These are polyester, polypropylene, and nylon. Of the three types, nylon is by far the better choice.
Nylon is extremely versatile in its applications. It is highly resistant to
abrasion
and has excellent
resilience
.
Within nylon, there are two groups:
nylon 6
and
nylon 6.6
. Nylon 6.6 is the
premium thermoplastic
. It is the thermoplastic that is most often specified by professional architects and designers because it provides the
flexural strength,
low-temperature toughness, UV Resistance
and is the most
resilient
. Nylon 6.6 performs well in many applications such as wind turbine blades, automotive parts, and other fields that get a lot of wear and tear. Nylon 6.6 has additional molecules that give extra strength and the resilience compared to nylon 6. If you still have no idea what Nylon 6.6 is, do a search on google.
Adjustable blade degree with included degree adjusters (Shims)
Increase/decrease blade angle by installing degree adjuster under the blades
"+" on the right side = Increase angle =
More
Torque, Less Speed
"-" on the right side = Decrease angle = Less Torque,
More
Speed
Specification
Material
Nylon 6.6 + Carbon Fiber (<20%)
Length
23.5 inches
Width (base)
5 inches
Mounting
6mm bolts
Weight (per blade)
166g, 6oz
Rotor
Apollo
Competitor's
Pros
-
20mm
rotor thickness, 66% more compare to competitor's
- Stronger Magnetic flux due to thicker rotor, and thus, more Power
- Evenly spread magnets decrease magnetic drag
- 6 balanced hole to reduce weight
- Reduce forces required to start rotor due to less reciprocation mass
- Brushless
Permanent Magnet Alternator
Cons
- only 12mm in rotor thickness and thus weaker magnetic flux
- Magnets are not evenly spread out (ie: screw at top)
- No weight reduction = harder start up
Specification
Rotor Diameter
77mm
Magnet Material
Rare Earth Neodymium magnets
Number of Magnets
12
Magnet Width (Rotor thickness)
20mm
Weight
682g
Body
Reference picture ONLY.
Please refer to listing details on the actual model you are getting.
- Bigger body allow fitting of a more powerful alternator than competitor's
- Longer body and tail (62cm) allow the Apollo to face wind even if more blades are added while our competitor just spins round and round
- High surface area tail, 33cm in height, 30% more surface area will let the turbine stay focus to incoming wind
- Installation of 29" blades and capture 50% more wind is now possible
Specification
Material
Aluminum (with coating)
Length
62 cm
Tail Height
33 cm
Tail surface Area
225 cm^2
Upgradable with 29" blades
Yes
Blades allowed
6
Hub
Pros
-
140mm
diameter, 10% larger than competitor's
- High blade capacity, allow up to
6
to be installed
- Covers the entire face plate to eliminate vortex
Cons
- 125mm in diameter
- Only allows 3 blades to be installed
- Does not cover face plate completely
Specification
Material
Aluminum (with coating)
Diameter
140 mm
Capacity
6 Blades
Compatibility
Air-X, 403, 303
Shaft Diameter
for 17mm shaft
Disc Thickness
23mm
II. Anti-Vibration System
Horizontal:
Apollo
Competitor's
Pros
-
Dual Metal ball bearing
located
at
front
and
rear
of rotor
- 5.5cm of stabilizing distance to prevent
rotor and blades from vibrating
- No vibration = Increase in efficiency
- Reduction in noise output
Cons
- 2 bearings placed side by side together
- Stabilizing distance effectively
shorten to 2cm (63% reduction)
- Vibration = Energy wasted
- Wasted energy gets converted to Noise and Heat
Vertical:
Apollo
Competitor's
Pros
-
Dual Metal ball bearing
to prevent vertical vibration
- Yaw shaft diameter: 40mm
- 3cm of stabilizing distance with 2 bearings
- No vibration = Increase in efficiency
- Reduction in noise output
- One piece design Yaw body provides more stability
Cons
- Single bearings will not eliminate vertical vibration
- Yaw shaft diameter: 35mm
- Stabilizing distance effectively shorten to 1.4cm with one bearing (53% reduction)
- Vibration will cause bearing to grind on yaw shaft and create a bigger play, which in turn will cause more vibration in a never ending cycle
- 2 pieces design Yaw body is less stable
III. Anti-Leak System
Apollo
Competitor's
Pros
- Unlike rubber, PVC Rings are much more durable will not harden and crack and cause leaks
- Bearing are covered and will not rust / leak
Cons
- Rubber ring will harden after approximately 1 year of use and will start cracking and leaking
- Bearing are exposed and will rust / leak
IV. Generator Specification
Body Material
Aluminum
Rotor Diameter
1
24
.5cm (49 inches)
Starting Wind Speed
(6 blades)
3.0m/s (7 mph)
Rated Wind Speed
13m/s
Survival Wind Speed
45m/s
Voltage
12
VDC
Rated Power
550W
Maximum Power
650W
Weight
9.92kg (21.88 lb)
Mount
1.5 in schedule 40 pipe 1.9 in (48 mm) outer diameter
What are included:
-1 Apollo Wind Turbine
- 6x Blades
- Hub with 6 lots
- Nose Cone
- Screws and Nuts
- Degree Adjuster
- Allen Key
- Instruction Manual
- RX Charge Controller
12 V
MONOCRYSTALINE SOLAR PANEL
Output
Max 100W
Type
Monocrystalline
Open Circuit Voltage (Voc)
21.5V
Maximum Power Voltage (Vmp)
18.4V
Short Circuit Current (Isc)
6.86A
Maximum Power Currrent (Imp)
5.98A
Output Tolerance
±5% (104.5W - 115.5W)
Operating Temperature
-40'C to 80'C
Frame
Aluminum Alloy
Efficiency
16.86%
Connection
Quick Connector
Cable
Install to box (90cm)
Number of Cells
36 cells
Glass
Tempered Glass
Battery Voltage
12V
Dimension
120.5 x 55 x 3.5cm
47.4 x 21.7 x 1.4 inches
Weight
18.4kg, 40.5lbs
Feature:
* For Rechargeable RV Car Boat 12V Battery
*Charging 12V SLA Battery
*Connect 12V DV Fan /LED Light
GreenergyStar
Grid Power III 600W MPPT Inverter
For Solar & Wind Hybrid Systems
3rd
Generation Grid Tie Inverter
Introduction:
Of all the different kinds of renewable energy available today, solar and wind are the two most popular ones favored by homeowners due to their
relatively
easy implementation and wide range of suitable sites. However, these green energy sources do not come with a plug to connect to a wall socket (the grid). Even if they do, there are different parameters for each type of renewable energy and interconnecting with the grid would present a challenge.
Fortunately, grid-tie inverters have been invented to solve this interconnection problem. "What is grid-tie inverter?" you asked. A Grid-Tie Inverter is a device that that can transform 12V DC electricity (i.e.: Solar Panels, Wind Turbine, Battery Storage) into 120-240V AC power that can be directly injected into your utility's electricity network (the power grid). However, the down side is, most inverters available in the market today are in the high output (1000W ~ 5000W) category. Their prices range in the thousands and it is just too much of an
upfront cost
for anyone interested in green energy generation. In addition, because of the high output, a certified electrician will need to be hired to install the equipments and connect the cables
"But I am a small home owner. I would like to start small and test things out and perhaps expand my system in the future if I have the money. I would also like to DIY to cut down on cost and have a project that I would be proud to work on... isn't there an
easier
and more
affordable
way to do this?"
Yes, there is. With our latest developed micro grid-tie inverter Grid Power 3 feature the popular plug and play function, you will be connecting your renewable energy sources into the grid and join the green movement in no time. Start small. Think Big. A Greener future awaits.
What's New in the 3rd Generation?
So you ask, "What's new in this third generation?". Well, by reaching the 3rd generation, we have again improved the power output by incorporating Maximum Power Point Tracking (MPPT) technology to harvest more solar energy. The inverter has also utilized better surge protection components to shield against voltage spikes and energy surges. In addition, this inverter will work with our SolarWind Hybrid RX charge controller to allow wind energy input. Here are the high lights:
Maximum Power Point Tracking (MPPT):
What is Maximum Power Point Tracking (MPPT)? MPPT is a techinque we implemented to get the maximum possible power from a solar panel. When trying to characterize the output of a solar panel mathematically, it can be represented by an IV-Curve (shown below). The equation for Power is
P = IV
. Where
I
is the
Current
,
V
is the
Voltage
, and
P
is the possible output
Power
. Each point on the curve is a possible combination for output power and our goal is to find the best combination to obtain maximum power.
In simple terms, we are trying to get the biggest rectangle to fit under this so called IV-Curve, the bigger rectangle we can fit, the more power we get. Below are graphs to help you understand the idea better. This is a comparison between inverters with and without MPPT on an 85W solar panel. Please note that different solar panels will have slightly different IV-Curves.
No Tracking Vs Tracking
Figure 1
No MPPT, with voltage fixed 17.5V
P = 17.5V x 4.6A =
80.5W
Figure 2
With MPPT, amount of current and voltage to draw are calculated
P = 17V x 4.95A =
84.15W
As we can see, Figure 2 is able to 84.15W with MPPT while in Figure 1, we can only get 80.5W. This is 4.5% increase in power output. Why do we care? Because solar panels are still quite expensive these days, and the increased power output will directly affect our return on investment (ROI). In addition, depending on weather, time of the day and amount of solar irradiation the panel receives, the IV curve will move along the Y-axis to reflect the possible increase / decrease in potential power output, and cause the maximum power point to shift along as well. Coming up are illustrations to visualize this idea.
IV-Curves Under different weather conditions
Figure 3.
Sunny, Clear Sky days in Summer
600 ~ 1000 W/m2
No MPPT
MPPT
Power
80.5W
84.15W
Color
Red
&
Yellow
Yellow
&
Green
Percent
N/A
+4.5%
Figure 4.
Scattered Clouds or Partly Cloudy days in Summer
300 ~ 600 W/m2
No MPPT
MPPT
Power
42.0W
46.4W
Color
Red
&
Yellow
Yellow
&
Green
Percent
N/A
+10.5%
Figure 5.
Cloudy or fog days, dawn or dusk in Summer
100 ~ 300 W/m2
No MPPT
MPPT
Power
5.25W
14.25W
Color
Red
&
Yellow
Yellow
&
Green
Percent
N/A
+171%
Figure 3 - 5 illustrate the power gain in different weather condition with MPPT compare to a non-tracking inverter that locks voltage at 17.5V. While 17.5V is randomly chosen, it does show what would happen in real life when there is not MPPT. Studies have shown, by making use of MPPT, there will be an average of 30% increase in power production. Since the maximum power point is a variable, we have implemented a tracking algorithm that utilizes the micro processing power of our inverter to calculate the optimum voltage and current to maximize our energy harvest.
Increased Power Rating:
In 2008, when we designed the first generation inverter, what we had in mind was an inexpensive device to allow the public to have a chance to test out renewable energy production and promote the green movement at an affordable price range. As people's environmental awareness increased over the years, the demand for bigger systems also increase. Therefore, once again, the power of this inverter has increased by 50% to 600W.
Compatibility with GreenergyStar SolarWind Hybrid RX Charge Controller:
Want to grid-tie a wind system? Then it is time to get a charge controller. The GreenergyStar SolarWind Hybrid RX is designed to work with our grid-tie inverters for solar and wind applications. It offers the protection needed by inverters against volatile storms and unstable inputs. Compatible with solar panels, 12V AC / DC wind turbines, Southwest Windpower's Air-X, 403, 303 and SunForce's 600W wind turbines.
Enhanced Safety:
In this generation, we have utilized better surge protection components to shield against potential energy surges during connection or disconnection to the grid. Voltage spikes in night time or stormy weathers are eliminated with higher grade electronics. The circuit board has been completely redesigned to accommodate to the UL 1741 Standard and the status of our UL application is currently pending.
New Features:
Maximum Power Point Tracking (MPPT) - optimize power output
50% enhanced in power output compare to second generation inverters
Unique and intuitive LED display design to reflect power output rate
Allow MORE types of power source to be connected with SolarWind Hybrid RX Charge Controller (ie: Air-X, 12V battery, and etc.)
General Features:
Grid-tied - sell green energy back to the utility at a premium rate
Plug and Play design, simple and easy. No hard-wiring or rewiring of existing electronics
Automatic 110V - 220V AC voltage switch
Island Protection: Inverter will shut down during black outs.
Synchronize with grid and generates pure Sine Wave
Reverse polarity protection
Stackable (connect in parallel for higher output)
Maximum input power: 600W
(rated at 16.6V and 36A)
System Voltage: 12V Nominal (see input / output sections for range)
2x External 30A fuse for easy maintenance
Internal diode to prevent reverse current to solar panels or wind turbine at night
High quality finned aluminum casing to protect internal electronics and act as heat sink to dissipate heat
Microprocessor based control electronics to regulate input and output
Installation:
Connects directly to Nominal 12V Solar Panels
Nominal 12V AC or DC wind turbine installations with battery will require respective charge controllers and dump loads.
Recommend using the GreenergyStar SolarWind Hybrid RX charge controller to monitor charging and discharging
Connect the included cable to the inverter, and then connect the other end to a wall socket.
Warning!
Reverse polarity in input will blow fuse and possibly
damage
the inverter.
Damages caused by reverse polarity is
not covered
by the warranty
Output Specifications:
Model
GP3
Maximum AC Output Power
600W
AC Voltage Range
100V ~ 260V Auto Switching
Frequency
45Hz ~ 65Hz
Over current protection
Yes, firmware controlled
Total Harmonic Distortion (THD)
<5%
Power Factor
0.99
Anti Island Protection
Yes, Inverter will disconnect from grid during black out
Output Current Waveform
Pure Sine Wave
Input Specifications:
Starting Voltage
12.8V
Drop out Voltage
10.5V
Operating Voltage Range
10.5V ~ 30V
Standby Voltage
8V ~ 10.49V
Shut Down Voltage
<8V
Withstand voltage
48V
(anything above will damage inverter)
Maximum Input Current
38A
Over current protection
60A Fuse
Reverse Polarity Protection
Above 60A will blow fuse. Under 60A will heat up internal electronics. Disconnect immediately do avoid damage
Stand-by power consumption
<1W
Mechanical Specifications:
Operating temperature range
-20'C - 65'C
Weight
1.17kg
2.6lb
Dimension (L x W x H)
19.3 x 16.5 x 5.4 cm
7.5" x 6.5" x 2.1"
Mounting
Wall Mount at base
AC Cable Length
1.5m
Cooling
Convection cooled with fan
Casing
High quality finned aluminum to act as heat sink for fast heat dissipation
Display
6 Green, 1 Orange and 1 Red LED
What are included:
1 x  GreenergyStar Apollo 650W AC 12V Wind Turbine
1 x  SolarWind Hybrid RX Charge Controller
2 x  12 V 100W Watt Monocrystalline Solar Panel
1 x   Grid Power III 600W
Upgrades / Recommendations
(not included in this auction)
WARNING !!!
Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury. Under no circumstances should you install the turbine where a
person could come in contact with moving rotor blades.
The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products
Warranty:
We will warrant this unit against any manufacture defects or workmanship for 1 year from the date of purchase. This limited warranty specifically excludes damage caused by
improper installation, accident, misuse
,
abuse
,
improper
storage
, or
any unauthorized disassembly, repair, or modification
.This warranty is not transferable. In the event of a claim against this warranty, the seller's obligation, and the claimant's sole remedy, shall be replacement of the product, repair, or refund of the original purchase price excluding any shipping and handling fees. All shipping and handling fees going both ways are responsible by the buyer.
NO OPERATING COST
GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND
Terms & Conditions
Bidding this auction means that you agree with the following terms & conditions.
All pictures and descriptions are subjected to change without notice. Items may not look exactly the same as the auction shown. We are not responsible for any inadvertent errors.
Payment
Total payment = winning price + shipping & handling
Insufficient payment will be charge extra US{{detail_product_description}}.50 to compensate the Paypal penalty fees.
Shipping
&
Handling
Total shipping = Base S&H + Combine S&H ( for each additional item )
a) Base S&H is the highest shipping cost of the first item.
Extended Area Surcharg
e:
For Address that UPS determined to be outside of their normal service area, they will charge an additional "extended area surcharge". Minimum is
US.00
, we will notify you if it is higher.
1. Combine shipments are only available on the condition of a
SINGLE PAYMENT
. Auctions that are paid separately will NOT be shipped in combo and therefore, they are not qualified for shipping discounts.
2. We ship within 48 hours after payment is received and confirmed. Please allow up to
5-10 BUSINESS DAYS
for item(s) with a physical address sending to the 48 states of United States & Canada. For international bidders, the shipping time varies with respect to your location.
3. Bounce backs due to incorrect shipping address will result in setback on deliveries. It is the buyer's responsibility to repay the shipping & handling fees.
4. We are not responsible for any loses or damages resulting from shipping.
Return & Refund Policy
No refunds after 30 days
Shipping & handling & other service fees are
NOT
refundable
All returned items must be in original packing.
Items that are used/ damaged/ deformed or altered in any ways will not be accepted.
A 20% restocking fee will be charged on all refunded items.
E-mails
E-mails are usually answered within 2~3 business days in priority order.
Spams and mass e-mailing will be deleted without slightest glance.
E-mails with virus or anything subjected to hacking are automatically deleted.