300W Wind Turbine Generator 6 Blade Charger Controller Windmill Power DC 12V/24v

Description

A new type of wind turbine is easy to install and has strong mobility. It can still work normally in the area with an average wind speed of 1m / s.
Specification:
Material: reinforced polypropylene material
Output voltage: 12/24V
Maximum power: 300W
Wind wheel diameter: 0.82M
Number of blades: 6
Rated wind speed: 12 m / S
Starting wind speed: 1 m / S
Protection grade: IP65
Installation steps:
1. Connect the cable to the terminal of the motor (pay attention to the positive and negative poles), and lead the cable out of the vertical pole
2. Connect the small vertical pole of the motor with the tower with four M 10 * 16 mm bolts.
3. Install the wind blade on the motor with 18 bolts of M6 * 28mm.
4. Use four M6 * 30MM screws to fix and lock the rudder stock and rotary body.
5. Use three M5 * 10mm bolts to lock the front and rear end covers of the rotation, and fix the rear air cap.
6. Connect the two outgoing lines of the motor with the positive and negative poles of the battery pack. (Note: the red lead is positive and black is negative.
Features:
1.High conversion rate of wind energy
2.Low running vibration
3.Wind start, stable power generation
4.No rust and corrosion resistance
Package Included:
1 x Wind Turbine Power Generator
Note:
Please allow 1-3MM differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
On Aug-10-21 at 18:58:06 PDT, seller added the following information: