1000 Watt Permanent Magnet Alternator 14P PMA 48 VOLT DC 2-WIRE for Wind Turbine

Description

Wind turbines generators sustainable 403 energy wind generaters mills wind mill generator power lakota wind power airx generation Wind turbines wind mills wind power wind power generation
This auction is for a MAG-CORE 48VDC  2 -wire PMA designed for use
with 11 our 28" Hornet blades or 5 of our 34.64" KT propeller's (blades)
USE FOR WIND TURBINE'S ONLY!!!!
USE FOR CHARGING 48 VOLT BATTERY'S ONLY!!!
NOT FOR USE ON ENGINE's
or
HYDRO. Used For 48 volt
battery charging.  For use with a high speed engine use a
12 volt PMA since they reach 48 volts at those high speeds.
DO NOT turn at speeds faster than 2700 RPM.
Optimized for 48 volt battery charging at speeds from 300 to 1500 RPM
You must use a 7.5 amp fuse or DC breaker with these!
This DC model INCLUDES three phase rectifier, Power-Coil Voltage-Coil  This high voltage model
can transmit power over 300 feet with low line loss
.
Thermodyne 1600W Wind Turbine Review
Video will open in a new window
Using the iPhone app? Copy this link into Safari:
TREX blades on SC12 PMA Wind Turbine windgeneering
Video will open in a new window
Using the iPhone app? Copy this link into Safari:
What's better, AC or DC wind turbine PMA's / PMG's
Video will open in a new window
Using the iPhone app? Copy this link into Safari:
Thermodnye Hornet Wind Farm
Video will open in a new window
Using the iPhone app? Copy this link into Safari:
24 V DC turbine with a 10-30V grid tie the BEST combo ever!
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
1000 Watts peak  - 500 Nominal    -  250 Volts at 2700 RPM good for direct feeding of high voltage grid ties. For 48 volt battery charging 1500 RPM is the maximum recommended speed.
FOR USE ON WIND TURBINES ONLY!!!  NOT FOR USE ON ENGINES OR HYDRO.  PLEASE CONTACT US IF YOU NEED A PMA FOR ENGINE OR HYDRO USE AS THEY ARE VERY DIFFERENT TO WIND PMA TYPES LIKE THIS MODEL.
Includes a real ori
ginal
MAG-CORE /14 pole PMA -
There are plenty of "Look-A-Like" PMA's on the market that cost less.
The modern type PLATE AND GROOVE rotor that we have developed is the most celebrated and also the most copied type which we pioneered.  The important part is that PLATE AND GROOVE makes power at MUCH LOWER RPM's than the older and traditional Clam type rotor designs that do not provide deep magnetic saturation of the Stator coil offering 600% more power in low RPM scenarios over Clam type designs
In small wind turbines this is VERY important to make your power in the LOWER RPM ranges.
Spend a little more and get a LOT more  BANG-FOR-YOUR-BUCK!!!  Money well spent.
Our Magnets are on an angle
We make our own brand new
ROTOR POLE
SHOES
AND
STATOR CORES
!!!
Our PMA's are built from the ground up using only 100% ALL new parts!
(Including the rotor pole shoes and stator coil stacks)
Our
NEW
rotor poles are balanced to within .002 grams for SMOOOOOTH rotation!
MADE IN THE USA!
Not a cheap import or copy.
Get the original
Mag-Core  Design.
Mag-Core PMA's have fantastic low speed start up!
Featuring 14 magnetic poles for achieving an amazing 35% power level increase!
Our Magnets are on an
angle
for easy turning.
By Hornet Power Systems
Use these powerful permanent magnet alternators (PMA's) to make cheap electricity with wind turbines
Stop wasting up to 50% of your power energizing the
coil of standard
brush type alternators. Get a real PMA!
Permanent magnet alternators are by no means standard "Automotive" alternators containing brushes and electro-magnetic coils. A PMA does not waste power by having to continuously create an energy intensive magnetic field.
We sell only highly efficient - long lasting true permanent magnet alternators!
"This series of PMA' are the most
versatile PMA's we have ever built"